:	Jun 15, 2004

:

The door glass should be lowered by approximately one third.

.

Carefully remove the outer waist seal.   Remove the 2 screws.   Release each end of the seal from the door frame.

.

Remove the front door window glass.   Using the special tool, release the 2 clips and lift the glass clear of the regulator.   Rotate the glass forwards and lift the glass from the door.

.

:   Do not disassemble further if the component is removed for access only. Remove the 2 door glass retaining clips.   Remove the 2 Torx screws.   Remove the 2 spacing washers.   Remove the 2 flat washers.   Note their fitted positions.

.

Install the 2 door glass retaining clips.   Install the spacing washers.   Install the 2 flat washers.   Tighten the Torx screws to 8 Nm (6 lb.ft).

.

Install the front door window glass.   Engage with each channel and secure in the clips.

.

Install the outer waist seal.   Install the screws.